Security System
Operation
To arm the system:
When the motorcycle is parked and the ignition key is turned to off, the Harley-Davidson® Smart Security System arms automatically within five seconds if no motion is detected. Upon arming, the turn signals will flash twice and the optional siren will chirp twice. While armed, the key icon in the speedometer face will flash every three seconds.
To disarm the system:
With an assigned fob present, the system automatically disarms when the ignition key is turned to ignition. When the module disarms, the optional siren will chirp once and the key icon will illuminate for a solid four seconds and then turn off.
Manual Override Process
In event of a misplaced or disabled fob, your Harley-Davidson® Smart Security System can be disarmed by using your five-digit, Personal Identification Number (PIN). Follow each step in the process below carefully. Note: Do not turn handlebars, straddle seat or lift motorcycle off the jiffy stand. During a PIN disarm, if the Smart Security System detects motorcycle motion the system will activate the alarm.
- Step No.
- Action
- 1
- If neccessary, verefy the current 5-digit PIN.
- 2
- Turn ignition key to ignition
- 3
- Quickly (within 2 seconds of turning ignition key) hold both turn signal switches in until confirmation. Key icon flashes at a fast rate. in the odometer window, a flashing dash will be followed by four more dashes.
- 4
- Enter first (a) in the PIN by pressing left turn switch a times. The first digit (a) in the odometer will be the first digit in the PIN
- 5
- Press right turn switch 1 time. The first digit is stored and the next dash will flash.
- 6
- Enter second digit (b) in the PIN by pressing left turn switch b times. The second digit (b) in the odometer will be the second digit in the PIN.
- 7
- Press right turn switch 1 time. The second digit is stored and the next dash will flash.
- 8
- Enter third digit (c) in the PIN by pressing left turn switch c times. The third digit (c) in the odometer will be the third digit in the PIN.
- 9
- Press right turn switch 1 time. The third digit is stored and the next dash will flash.
- 10
- Enter the fourth digit (d) in the PIN by pressing left turn switch d times. The fourth digit (d) in the odometer will be the fourth digit in the PIN.
- 11
- Press right turn switch 1 time. The fourth digit is stored and the next dash will flash.
- 12
- Enter the fifth digit (e) in the PIN by pressing left turn switch e times. The fifth digit (e) in the odometer will be the fourth digit in the PIN.
- 13
- Press right turn switch 1 time. The fifth digit is stored and the next dash will flash. The key icon stops blinking and the Smart Security System is disarmed.
